Home improvement duct machine advantages how to install duct machine

Now, the air conditioner is already full of households, but when installing air conditioners, some people are comfortable with home air ducts, but at the time of installation, what are the characteristics of home improvement machines, and how to install air ducts. Machine, I don't know much about these. Next, I will introduce the advantages of home improvement duct machine and how to install air duct machine for everyone. I hope everyone can refer to it when purchasing home air duct machine.

I. Advantages of home improvement duct machine

1. First of all, the price is low: but the air duct air conditioner has a lower cost than the general central air conditioner. The reason why the air conditioner price is relatively low is that it is cost-effective and has been favored by many people.

2. Next, it is beautiful and elegant: the air duct air conditioner is in the form of a ceiling, and it is hidden inside, but it gives a lot of power to the home decoration. This is both beautiful and stylish and does not destroy the overall home improvement effect.

3. There is also the convenience of use: However, after the successful installation of the air duct air conditioner, the effect is the same as that of the central air conditioner, but it is also convenient in maintenance and suitable for mass consumption.

2. How to install the duct machine

1. Let's first say that we make the static pressure box according to the number of air outlets that the user needs and the size of the air outlet of the indoor unit. Then if the user needs 3 air outlets, do 3 static air pressure boxes. The static pressure box is made of a galvanized iron plate having a thickness of 0.5 to 0.8 mm. But there are a few wind tunnels to do a few air ducts. Then the diameter of the air passage is 200mm, the height is 180mm, and the top is turned over. The air inlet of the static pressure box is slightly larger than the air outlet of the indoor unit. The height of the box is 400mm and the width is 300mm. The shape of the static pressure box is shown on the right.

2. There is also a way to make the air duct interface. A cylinder of φ200 mm × 200 mm was made of a 0.5 to 0.8 mm galvanized iron plate in the duct joint, and both ends were turned over.

3. Finally, to solve the wind tunnel, we first determine the size of the tunnel hole according to the number of tuyères, and then use the electric hammer and two hammers to open the tunnel hole on the wall. For example, three air ducts need to open a wall hole of 200mmX800mm, and so on. However, a groove for inserting an insulating sleeve is opened on the wall of each air passage opening, which is about 50 mm deep and 20-30 mm wide, and is used for connecting the switch wires and switches of the control air outlet.

When people install air conditioners, some people install home air duct machines. The above article says about the advantages of home improvement duct machines and how to install duct machines. If you want to know more about decoration information, please continue to pay attention. Renovation home network.

More related wonderful reading:

Home improvement duct machine advantages and disadvantages analysis home improvement duct machine purchase skills